Skip to main content

The Lawnmower and I.

I was going to call this article 'Me and the Lawnmower' however, apparently, it is grammatically incorrect to put yourself first. Were it not for grammar I would certainly not put the lawnmower first. Let me tell you about the lawnmower...

Our family owns a second hand lawnmower that we bought so we could cut our own lawns (obvious really...I mean what else do you use a lawnmower for?). The lawnmower and I have a love-hate relationship. I hate the lawnmower and it loves to plot ways to make me hate it even more every time I use it.

Typically, at first, it was fantastic. Started easily and did the job no problems. It was only once it became difficult to start that the wheels started to fall off. Well, not so much fall off, as split in half. Our lawnmower has half a back wheel. It's still a full circle but imagine that sliced in two like slicing off a piece of met worst or cucumber.

After that it was never the same. Every time I wheeled it out to mow the lawn it was a battle to get the thing started. Go through the routine...clean the spark plug, clean the air filter, try to get the accelerator in just the right spot, pull the rip cord, not hard enough, pull it again...oh it started...then it died, try again, oh it's going...looks like it's going to work. Cool.

Then, one time, when all that wouldn't work, I had the bright idea to start adjusting the fuel screw on the carborator. What a mistake that was. Each time I thought I had it adjusted to just the right spot (read the lawnmower started) the next time I used it, no way was it going to start on that adjustment again. It took many, many adjustments to get that screw in just the right position so that I will never mess with the thing again because it seems to work most times. Back to previous paragraph for how to get the lawnmower going.

The last time I tried to start it, the mower had a new plan - straight out of left field. Second pull of the rip cord and it broke. The rip cord that is. Crap. How am I supposed to start it without a rip cord?

Proceed to remove and pull apart the rip cord housing. Fortunately there was enough of the rip cord left to just re thread it and put it all back together but needless to say the cord is much shorter now. Got to keep that in mind each time you pull it because if you expect a long pull and only get a short one you can do yourself serious injury to your shoulder (there's something decidedly smutty about that last sentence but I'm not going to make that connection for you - I'm talking about the lawnmower!).

So that's my article about my Lawnmower. It doesn't really deserve this minor fame and brief spot in the lime light but at least those of you with pretentious lawnmowers will know that you're not alone.

Maybe there's a support group?
TET Life Topics:

Comments

  1. AnonymousJanuary 27, 2007 9:24 AM

    hmm maybe not a support group but I know of a good tip. OR you could take it to one of those car crushing places and have it made into a little cube to hold your studio door open for you?

    ReplyDelete

Post a Comment

Comments are moderated by an actual human (me, TET) and may not publish right away. I do read all comments and only reject those not directly related to the post or are spam/scams (I'm looking at you Illuminati recruiters... I mean scammers. Stop commenting on my Illuminati post!).

Buy Whimsical Cat Art Prints by TET (Redbubble Store)

Slide 1
Slide 2
Slide 3

Enjoy Your Favorite TET Art Up Close, Interactive, and so Relaxing!

Enjoy Your Favorite TET Art Up Close, Interactive, and so Relaxing!
Relax and Challenge Yourself with a Fun, Whimsical Cat Art Jigsaw - 30-1000 pieces. Click Image for More.

Popular posts from this blog

What a Future with Flying Cars Might Look Like

Jetsons Style Flying Car - Image by TET & Leonardo.ai Regular readers of this blog will know that flying cars have been a recurring subject over the years. I even collected all my posts into a book you can buy on Amazon Kindle called Where's My Flying Car? The development of a true flying car is a fanciful one, largely because we've yet to come up with anything that actually looks like a car that flies.  Most serious projects that even make it to a prototype are either small planes that compact into something you might drive from your home to an airport (if they don't have any vertical landing and take off (VTOL) capability) but you wouldn't drive to you local supermarket for the weekly groceries run, or they're some kind of drone/helicopter configuration with so many propellers you'll worry about shredding pedestrians who get too close. The dream is something that looks exactly like a car but can drive on a road, or hover (kind of like Luke Skywalker's ...
Post a Comment
Continue Reading »

Review: ArtHelper - The All-In-One AI Writing + Marketing Assistant for Artists - 'ChatGPT for Artists'

ArtHelper prides itself on being all 'human-made' art. T he idea of an AI, trained specifically on art business marketing, that can not only offer advice on marketing your work, but also assist with creating all the content too, is certainly appealing. Especially to those of us who would rather spend more time creating our art than trying to sell it. ArtHelper does just that whilst attempting to be your 'home' on the internet. A destination for your profile and portfolio, a marketplace for your art, and a directory of artists as well, with one distinction - all the art must be human made. Which, for you AI artists, doesn't count the prompt for AI generated art - because the idea, according to ArtHelper's creators, isn't the art. Which is a fair point, in terms of promoting art 'made by a human', but can get kind of murky when you understand that not all AI art is generated from a single prompt... and 'found object art' isn't actually ...
Post a Comment
Continue Reading »

New Cat Art Collaboration: TET's Cats Paintings and OpenArt AI Model Workspace (Photobooth)

TET's Cats AI generated art trained on my own art style. Way back in the early 2000's I started painting stylized cat artworks to illustrate some cat themed poems I'd written, that I exhibited and sold online in an exhibition titled 'Sleeping Cats' in 2004. You can see all these early works in my Flickr Album . Many are also available to buy as prints in my RedBubble Store . Leading on from that I began selling my paintings on ebay where the cat themed works were almost guaranteed to sell over any other subject I painted. As a result I became some what known for my cat art to the point where people would commission me to create images of their own pet cats in my cartoony style. Flash forward a decade (almost two at this point) and I haven't painted any cat themed art in years. To be honest I haven't done any traditional painting at all in years. In the last couple of years AI image generators have really caught my attention. Specifically that they are able t...
Post a Comment
Continue Reading »

Is AI Art 'Art'? The Say NO to AI Art Movement, and Why Human Artists Will Adapt

AI Art No T-Shirt by TET Also available on other items . Right now there is a big debate over not just whether AI art is 'art' but whether AI's are actually ripping off the work of actual human artists, without their consent, to create their images - particularly images 'in the style of' specific artists. From my own observations this debate started to get more traction when artist's signatures began appearing in the output of AI Art  image generators. Is It Art? Cool Froyd the Cat Sketch by TET. My style is very much influenced by classic Disney and WB character styles. To get some clarity on how real human artists work (of which I am one)... we, that is all of us... take influences from the art that has come before. i.e. whatever artists we like, have studied, seen etc. we are influenced by. It shows up in our work, intentionally or not. If you really study my own cartoony art style you'll see I'm heavily influenced by early Disney and Warner Bros cart...
Post a Comment
Continue Reading »

TET Artwork Diary: Cats, Goats, and Battlestar Galactica's Cylon, Number Six

Y ou wouldn't know it from this blog, where I reference it a handful of posts , but I am a big fan of the rebooted 2003  Battlestar Galactica Series . Which is how I come to be Facebook following the series most recognised Cylon, Six - well the actress who plays six anyway, Tricia Helfer . One thing you'll learn pretty quickly about Tricia is that she owns a lot of rescue cats - and that she's more at home being a farm/country girl, surrounding herself with animals than she is living in cities - though she definitely seems to drift between the two worlds with ease. Cats and Goats Tricia with Larry and Earl. Still from Tricia Helfer's FB Video . However, this is a blog post about a cat and goats, specifically Trica's Goats, Larry and Earl, that currently live at the Farm of the Free . She posted a video of herself visiting them on her Facebook . Click the link for the full video. Cat at Farm of the Free with Tricia, Larry, & Earl. Still from Tricia Helfer's F...
Post a Comment
Continue Reading »

How to Transfer Any Line Art to Your Griptape - Easy Skateboard Griptape Art Tutorial

Dog Star Griptape Art by TET Griptape art is once again gaining popularity amongst modern skateboarders. For those of us who have tried to create our own griptape art, using paint pens, you'll know reproducing your design onto the grip, without making any mistakes is incredibly challenging. Mostly because you just have to go for it and draw the design freehand, with paint pens, directly onto the griptape. You can make the odd mistake here or there but if you get the proportions of the design completely wrong, it can be very difficult to fix. Often you just have to live with the mistake. To address the problem I've come up with an easy way anyone can transfer a line art design to their griptape, removing almost all the anxiety of getting the proportions wrong. In fact, you could do this with any line art design, even if you have no drawing skill at all. Watch the video below to see my technique in action and/or skip past the video where I highlight the basic steps to get your de...
Post a Comment
Continue Reading »

Two night Stay Glenelg, South Australia - Glenelg Motel, Beach Front, Cafe Strip/Jetty Road, and Evening Temptation Twilight Cruise

The Glenelg Giant Wheel. T he Glenelg foreshore and Cafe/Shopping strip (Jetty Road) at the end of the tramline from Adelaide, South Australia is arguably one of the must visit tourist regions of the city. It particularly has a lot to offer families with, not just the beach, but quite a number of playgrounds and grassed reserves as well. My partner booked us a post weekend, two night (Sunday and Monday), getaway in Glenelg by way of some discount vouchers she secured as part of a promotion encouraging people to visit the region over the Summer. Glenelg Motel The recently refurbished rooms of the Glenelg Motel raise your expectations from what the exterior of the rooms themselves suggest, which is a very 1970's vibe of your standard motel with parking right outside your front door (and not much else). Our room was spacious, and the modern furnishings were easily to the standards of any hotel we've stayed in over the last few years. The rooms look very modern with everything you...
2 comments
Continue Reading »