Skip to main content

Frog Van, Right Spanner - Part 3

Continuing my work on fixing the Frog Van, today I've removed both the inlet and exhaust manifolds to reveal the damage to the gasket (see image below).

Manifolds removed with the metal gasket still in place.

From the image above, the circular holes are for the inlet manifold whilst the square holes are for the exhaust manifold. Around the square hole on the far right, the top of the gasket was severely damaged with an obvious leak.

Having never seen a new version of this gasket I'm not sure if it is simply a metal gasket or a metal gasket with a black coating on each side? I've since watched a few Youtube videos on changing a manifold gasket where all the gaskets are metal only. Leading me to believe that possibly, the person who installed this gasket, coated it with a product called 'gasket goo' on both sides. 

Which may have been fine except, with all the overheating trouble the Frog Van has had in the past, the heat may have been more than the product can take and the 'goo' has burned away. However I won't know for sure until I get the new gasket - which I've ordered from a local parts retailer and should have by tomorrow.

I don't know if I'll get this finished tomorrow. I've got another problem of a bolt that's broken off in the bottom of the inlet manifold that may not be easy to remove (another problem of not having the right tools to remove it). Crossing my fingers though. It would be great to have this finished and be driving by the weekend.

TET Life Topics:

Comments

  1. Mum60September 01, 2011 8:25 PM

    I hope it all works when you've finished! It's all double dutch to me too! Pity if some qualified mechanics weren't looking in, or, at least those who know what they are doing if handy with car engines! Good luck! Don't go too far until you're sure it all works!

    ReplyDelete
  2. TET (David Arandle)September 05, 2011 11:00 PM

    I definitely won't be going too far to begin with. Swapping the gasket is actually not that hard... it's just getting all the other stuff out the way so I could get at it that was the hard part.

    ReplyDelete

Post a Comment

Comments are moderated by an actual human (me, TET) and may not publish right away. I do read all comments and only reject those not directly related to the post or are spam/scams (I'm looking at you Illuminati recruiters... I mean scammers. Stop commenting on my Illuminati post!).

Buy Gifts and Apparel featuring art by TET.

Popular posts from this blog

Checking in on Tesla's Optimus Robot - Managing Expectations

Last year Elon Musk announced at the first Tesla AI day the Tesla Bot, which has since been renamed the Tesla Optimus, that is basically a general purpose humanoid robot assistant with human like appearance and proportions. Elon expected they would have a working prototype by the end of 2022. While very little has been released about the project since, in June Elon took to Twitter to announce that they would delay this year's Tesla AI day until September 30 in anticipation of having a working prototype of the robot by that time. Elon Musk announces the Tesla Bot at the 2021 Tesla AI day. When I initially wrote about the Tesla Bot I noted that both Boston Dynamics and Disney Imagineering are developing robot technologies that demonstrate a streamlined, humanoid robot like Optimus is certainly possible. However with precious few details, and the occasional appearance of static, concept manikins of Tesla Optimus bots at places like the Cyber Rodeo Gigafactory Austin, Texas  (see vi...
Post a Comment
Continue Reading »

Is AI Art 'Art'? The Say NO to AI Art Movement, and Why Human Artists Will Adapt

AI Art No T-Shirt by TET Also available on other items . Right now there is a big debate over not just whether AI art is 'art' but whether AI's are actually ripping off the work of actual human artists, without their consent, to create their images - particularly images 'in the style of' specific artists. From my own observations this debate started to get more traction when artist's signatures began appearing in the output of AI Art  image generators. Is It Art? Cool Froyd the Cat Sketch by TET. My style is very much influenced by classic Disney and WB character styles. To get some clarity on how real human artists work (of which I am one)... we, that is all of us... take influences from the art that has come before. i.e. whatever artists we like, have studied, seen etc. we are influenced by. It shows up in our work, intentionally or not. If you really study my own cartoony art style you'll see I'm heavily influenced by early Disney and Warner Bros cart...
Post a Comment
Continue Reading »

James Gunn's Social Media Monkeys Joke Was a Highlight of His Superman Movie For Me

B efore James Gunn's Superman Movie was released there was a whole rumor going around that the movie would feature monkeys on computers trolling Superman's social media, sparking much outrage. #supersh*t. I didn't know this was even a thing until just prior to writing this article. I did a search to see if anyone had posted a clip of the monkeys scene from the movie and got pages of discourse featuring videos and articles prior to the film. Most of it from Gunn detractors (let's say) seeing it as some kind of childish swipe at them... well not them specifically but, you know, those other people who have every right to hate on anything sight unseen. Anyway, I'm not going to give even one such example a link or air because it's kind of sad watching someone devote so much commentary to a throw away gag that is absolutely a nod to James Gunn's Superman trolls.  The whole reason this post exists, is to say I loved the joke, because fourteen years ago, and I...
Post a Comment
Continue Reading »

1X's NEO, The Home Robot, Fails to Impress But It is Progress For Home Humanoid Robot Assistants

1X's NEO, The Home Robot, Tends some Plants. Image: 1X website . J ust over a year ago I wrote about new robotics start up, 1X and their Plans to Build 100,000 Humanoids by 2027  in the form of their NEO Home Robot  household assistant. About a year later and NEO has undergone a bit of a makeover, and you can pre-order your own NEO in one of three stylish colours, for delivery some time in 2026. At USD$20,000.00 the price is a bit of buzz kill but 1X does offer a $499 monthly subscription plan as an alternative. Unfortunately the launch hasn't been the show stopper 1X might have hoped for because NEO isn't a fully realised, autonomous robot just yet. While it can learn to do tasks around your home autonomously, there's a bit of a learning curve between when you first receive it, and when it actually becomes useful in a meaningful way. Which was not helped by a video released on The Wall Street Journal's YouTube channel,  I Tried the First Humanoid Home Robot. It Go...
Post a Comment
Continue Reading »

Dusting Off the Board Slider - Second Sunday Skate Sessions S02/Ep01 (Skateboard Basics)

My home made 'curb' board slider. S eason 02, Episode 01 of my ten part, Second Sunday Skate Sessions Series is here. I'm still working to master the tricks of Braille Skateboarding's Skateboarding Made Simple Volume One, however, this season will be more focused on my 'curb' Board Slider, that I built, and seeing what tricks I can learn on that. If you're actually interested in following my full progress of relearning to skateboard, the first season can be viewed in these posts: Introducing the Second Sunday Skateboard Sessions - Doing Less to Skateboard More Second Sunday Skateboard Session Ep 2 - Some Improvements Second Sunday Skateboard Session Episode 3, 4, and 5 - Definitely Seeing Progress Second Sunday Skateboard Session Episode 6, 7, and 8 - Shuv-its On Lock (Pretty Much) Second Sunday Skateboard Session Episode 9, and 10 - Shuv-it Revelation and Did I Improve? In this episode I do a quick run through of Skateboarding made simple tricks just to sh...
Post a Comment
Continue Reading »

How to Transfer Any Line Art to Your Griptape - Easy Skateboard Griptape Art Tutorial

Dog Star Griptape Art by TET Griptape art is once again gaining popularity amongst modern skateboarders. For those of us who have tried to create our own griptape art, using paint pens, you'll know reproducing your design onto the grip, without making any mistakes is incredibly challenging. Mostly because you just have to go for it and draw the design freehand, with paint pens, directly onto the griptape. You can make the odd mistake here or there but if you get the proportions of the design completely wrong, it can be very difficult to fix. Often you just have to live with the mistake. To address the problem I've come up with an easy way anyone can transfer a line art design to their griptape, removing almost all the anxiety of getting the proportions wrong. In fact, you could do this with any line art design, even if you have no drawing skill at all. Watch the video below to see my technique in action and/or skip past the video where I highlight the basic steps to get your de...
Post a Comment
Continue Reading »

TV Series Review: Bat-Fam (2025 Amazon Prime) *Spoiler Free*

I  am surprised I did not review Merry Little Batman (2023), the animated movie from Amazon Prime that clearly proved to be so popular they turned it into a ten episode series titled, Bat-Fam (2025). While neither the film or the series are intended for adults, they're still very watchable for older fans. Making them a great family experience for parents looking to introduce their younger children to the more fun aspects of Batman lore. Both kind of fill a similar space that Adam West's 66 Batman did, except I don't think, even young children, would take Bat-Fam as seriously as young kids took the 66's Batman series back in the day. It's been a couple of years since I watched the original Merry Little Batman movie (but it's a fun Christmas movie, and I highly recommend it), so I'm not going to review that here. You don't need to have seen it but it does give you some context for Damien (Yonas Kibreab) being 'Little Batman' rather than Robin. Be...
Post a Comment
Continue Reading »