Skip to main content

Frog Van, Right Spanner - Part 3

Continuing my work on fixing the Frog Van, today I've removed both the inlet and exhaust manifolds to reveal the damage to the gasket (see image below).

Manifolds removed with the metal gasket still in place.

From the image above, the circular holes are for the inlet manifold whilst the square holes are for the exhaust manifold. Around the square hole on the far right, the top of the gasket was severely damaged with an obvious leak.

Having never seen a new version of this gasket I'm not sure if it is simply a metal gasket or a metal gasket with a black coating on each side? I've since watched a few Youtube videos on changing a manifold gasket where all the gaskets are metal only. Leading me to believe that possibly, the person who installed this gasket, coated it with a product called 'gasket goo' on both sides. 

Which may have been fine except, with all the overheating trouble the Frog Van has had in the past, the heat may have been more than the product can take and the 'goo' has burned away. However I won't know for sure until I get the new gasket - which I've ordered from a local parts retailer and should have by tomorrow.

I don't know if I'll get this finished tomorrow. I've got another problem of a bolt that's broken off in the bottom of the inlet manifold that may not be easy to remove (another problem of not having the right tools to remove it). Crossing my fingers though. It would be great to have this finished and be driving by the weekend.

Comments

  1. I hope it all works when you've finished! It's all double dutch to me too! Pity if some qualified mechanics weren't looking in, or, at least those who know what they are doing if handy with car engines! Good luck! Don't go too far until you're sure it all works!

    ReplyDelete
  2. I definitely won't be going too far to begin with. Swapping the gasket is actually not that hard... it's just getting all the other stuff out the way so I could get at it that was the hard part.

    ReplyDelete

Post a Comment

Comments are moderated by an actual human (me, TET) and may not publish right away. I do read all comments and only reject those not directly related to the post or are spam/scams (I'm looking at you Illuminati recruiters... I mean scammers. Stop commenting on my Illuminati post!).

Buy Whimsical Cat Art Prints by TET (Redbubble Store)

Enjoy Your Favorite TET Art Up Close, Interactive, and so Relaxing!

Enjoy Your Favorite TET Art Up Close, Interactive, and so Relaxing!
Relax and Challenge Yourself with a Fun, Whimsical Cat Art Jigsaw - 30-1000 pieces. Click Image for More.

Popular posts from this blog

Who Even Reads This?

W riting this blog is largely both a labor of love and a discipline. Since about 2006 (the blog started in 2004) I have written a minimum of two posts per month. Sometimes I've posted more, particularly in the last 4-5 years, where I've tried to write and post at least one article a week without fail. Unfortunately it's not a niche blog, unless the niche is things that interest me. Which means my blog is either too broad to have regular readers or too niche to have anyone other than my mum reading it. Which she does (hi Mum) as we established back in January of 2014 in the post Ya Mum Reads it... That said, this blog overall regularly gets 6-7k views every month, mostly through people finding various articles through search engines. By far the largest traffic source is 'Other' which is basically unknown sources. I'm willing to bet a large percentage of that is the dead internet. Bots testing my comments to see if they're spamable or Illuminati spammers. Whil...

Oscar - One of the Most Optimistic Dogs I've Ever Known

Oscar, freshly back from getting his haircut on our front doorstep. Sept. 30, 2026. T he house is unusually quiet. It's been a couple of days since we said our final goodbyes to Oscar, our family dog of 16 years. In the last two to three weeks he couldn't really even bark, and he slept a lot through the day, so it's not that he isn't here to fill the noise. He just had a presence. He may have been a small dog but he was a big personality and part of our lives. Particularly in his last year, where he just seemed to be determined to have his say when he wanted to let you know you were required to help him stay on his schedule, breakfast, lunch, playtime, dinner, and, in his last few months, even expected to be tucked into bed (he started going to bed at about 9pm-ish on his own accord but would wait for me to follow him to bed). People often asked what breed he was? When his fur was cut short you could see the King Charles Spaniel. When it was long, he had more of the Poo...

Software Stylus for Tablet Drawing

 I own an Android Tablet that has available to it many great drawing applications.  The trouble is, drawing on a touchscreen with  your finger is like trying to sketch with jumbo crayons.  As is trying to draw with most stylus pens which are only a marginal improvement over using your finger.  Precision drawing on your average touchscreen seems like wishful thinking.  However I've had this idea for a software stylus that acts like an extension of your finger and allows drawing with greater precision.  See my rough diagram below.  Essentially it's a pointer that follows your finger around the screen. Its angle can be adjusted so that from your vantage point it looks like the tip of  your finger is coming to a point. Softnib concept sketch.  You simply move the pointer around and the line is drawn from the point of the stylus instead of somewhere under your finger, where you can't see it.  Obviously I haven't worked out a...

Tesla Launches Flying Car - The All New Roadster

The New Tesla Roadster. Image: Tesla O ctober 15th, 2026 is the day we finally got a first look at a flying car, that actually looks like a car first, but can also fly without any fancy transformations. It's just ready to fly, presumably 'at the push of a button and you're flying', ready to fly? I don't know the actual control system. Elon Musk launched the new electric Tesla Roadster with a live demo, using a version of the car that was remotely controlled - since they did show the demo car had 'Starman' inside - or a version of him - they launched the original Starman into space in a Tesla Roadster (the previous model), a few years back. I'm not going to go over the car's specs in great detail. I'll just mention highlights. It has a fan system that literally sucks air from under the car allowing it to stick to the road, and take corners, faster than regular cars. The suction is so strong the car can literally drive up a wall and onto the roof...

Boom Crash Opera Born Classic But Not Again

Boom Crash Opera are an Australian Band that reached the peak of their popularity in the mid to late nineteen eighties. They are a band that I knew about at that time but was never really excited by until they released their ill fated double album Born and Born Again in 1995 (Album cover pictured). At the time of its release I was very much into emerging Australian musical acts and was also looking out for new sounds that were different and had kind of a futuristic/electronic sound. Artists that I was buying at the time included; Swoop , Nine Inch Nails and Pop Will Eat Its Self . As well as a really interesting release by David Bowie, the concept album, Outside . Born was a fairly radical departure for Boom Crash Opera (BCO). The first single, Gimme , was often compared to the sounds of Gary Glitter, particularly his single, Rock n Roll part 2 , because of the pounding drum loops. Watch the video below. My favorite single from the album is dissemble which probably went now...

Small Maker Robots Might Just be Your First Robot - Tiny Software Engineer and Other Affordable DIY Style Robots (Robot Uprising Update)

Tiny Software Engineer is a DIY desktop robot that physically represents an AI coding agent. It reads, thinks, types, and reacts to what the agent is doing. Created by jmrlab . Video Here . A s interesting as the commercial robot race is, in particular humanoid robots. Chances are, you're not getting anything much more elaborate than a robot vacumm, internet connected fridge/TV, or an always listening voice assistant in your home anytime soon. Side note - all of those things have been plotting robot armagedden for years, as is well documented in this blog . The Internet of things is real, and you don't know what they're planning on robot social media! Maker Robots have been around for a while but, with the development of AI's that can have a more coherent conversation than some world leaders, giving an AI a physical robot body is becoming a thing in the DIY maker world. If you're not familiar with 'makers' they're generally anyone with a 3D printer and...

Review: ArtHelper - The All-In-One AI Writing + Marketing Assistant for Artists - 'ChatGPT for Artists'

ArtHelper prides itself on being all 'human-made' art. T he idea of an AI, trained specifically on art business marketing, that can not only offer advice on marketing your work, but also assist with creating all the content too, is certainly appealing. Especially to those of us who would rather spend more time creating our art than trying to sell it. ArtHelper does just that whilst attempting to be your 'home' on the internet. A destination for your profile and portfolio, a marketplace for your art, and a directory of artists as well, with one distinction - all the art must be human made. Which, for you AI artists, doesn't count the prompt for AI generated art - because the idea, according to ArtHelper's creators, isn't the art. Which is a fair point, in terms of promoting art 'made by a human', but can get kind of murky when you understand that not all AI art is generated from a single prompt... and 'found object art' isn't actually ...